Green Led Tape utilise une bande étroite de carte de circuit imprimé flexible (FPC) comme substrat, avec des LED à haute luminosité réparties de manière uniforme sur la surface et revêtues d'une couche de potting en silicone ou en PU non jaunissante. L'adhésif de qualité industrielle 3M est appliqué au dos pour une installation rapide. Livré en rouleaux et coupé à la taille, il convient à des applications professionnelles telles que les contours linéaires et l'éclairage indirect. C'est une bande de lumière LED flexible qui émet de la lumière verte pure.
Green Led Tape utilise des LEDs à haut rendement 2835/5050 en option avec une densité de 120 à 180 LEDs / mètre, un flux lumineux typique de 700 à 1100 lm / mètre et un angle de faisceau de 120 ° pour un éclairage uniforme et sans obscurité, répondant aux exigences d'éclairage de détail et d'affichage.
La longueur d'onde de la lumière est concentrée entre 520 et 535 nm, avec une tolérance de couleur de <3 SDCM and high color saturation. It is ideal for display lighting that aligns with the brand's primary color scheme, creating a clear green visual language.
Power ranges cover 6/9.6/12/14.4 W/meter. Combined with high-efficiency drivers, typical system power consumption for a 5-meter strip is less than 75W. It complies with ErP energy efficiency and RoHS environmental protection requirements.
Green Led Tape is available in DC12V/24V versions. The 24V version supports continuous LED strips up to 10 meters on a single end, with lower voltage drop. Its ≥2KV ESD protection design provides enhanced reliability.
Indoor version IP20; surface-coated/sleeved version IP65; extruded silicone fully encapsulated version IP67/IP68, suitable for long-term outdoor use. Operating temperature range -20°C to +50°C.
Available widths of 8/10/12 mm, with a minimum bend radius ≥30 mm. Cutting pitches of 25/50 mm are available, and the end features 2-pin/4-pin quick connectors for easy on-site splicing.
Dual mounting solution with 3M 300LSE adhesive and stainless steel clips on the back. Supports 0–10V, PWM, DALI, and DMX dimming control, compatible with mainstream control systems.
For shelf light troughs and door headlines, choose 24V, 120 LEDs/meter, 9.6W/meter, and SDCM<3 Green LED Tape to ensure uniform, fade-free strips. 50mm cuts easily fit display dimensions and enhance the visibility of green-themed displays.
Green LED Tape uses an IP20 indoor version with an 8mm width, concealed between the bar counter and soft packaging. CRI ≥ 90 (enhanced green color rendering) ensures a clearer view of the cup body and branding materials. A single 5m cable allows for neat routing and flicker-free photography.
A linear wall washer is built into the ceiling, equipped with 24V, 14.4W/m, and a 120° beam angle. It connects to a DALI system for scene-based dimming, boasting a continuous operation time of over 50,000 hours (L70) and low maintenance.
IP67 extruded silicone is recommended, resistant to UV and salt spray. It operates in temperatures of -20°C to +50°C and is stable in rain and fog. 10m long-distance wiring reduces power points and provides guidance for nighttime rides.
1200 lm/m high-brightness Green LED tape is used around the display stand, ensuring a uniform, grain-free light pattern. The dual-retention 3M adhesive backing and snap-on design prevents contact and detachment from frequent pedestrian traffic. It integrates with a 0–10V dimmer to create a ceremonial delivery experience.
Use 10mm wide, ultra-dense Green LED tape with 180 LEDs/meter to delicately outline product edges. PWM 1kHz dimming eliminates photographic streaks, making on-site photography more user-friendly. Quick connectors enable on-site layout changes in less than 10 minutes.
Use 9.6W/meter Green LED tape for overhead guides and shelf end guides, ensuring clear identification from a distance. Compatible with UL/CE certified power supplies, it's quick to replicate across multiple stores, and standardized material lists for each store facilitate procurement.
